Changing some parameters in the production technology of camambre cheese

One of the exclusive European products is camembert cheese. This is a soft cheese with a current consistency, rich taste, and aroma, with a characteristic crust, on top of which the white mould Penicillium camembert grows. However, the organoleptic characteristics of the classic camembert are particular and differ from the taste habits of Russians. Russian consumers do not like too fluid cheeses and flavorful. This has caused a lot of problems with its sale. In this regard, the purpose of the research was to adjust the primary operations in the technological map related to the processing of cheese grains and moulding, as well as the selection of starter cultures. In our research, we suggest that after cutting the clot, the cheese grain should be set and the moulds filled utterly, reducing the cost of cheese moulding. The second factor that we propose is the use of domestic mesophilic starter culture MN (AltaLact). Organoleptic, physicochemical and microbiological parameters were determined in the finished cheese samples. So, the cheese taste was creamy when using the domestic starter culture MN (AltaLact) and setting the cheese grain after cutting the clot. The mushroom had no bitterness on the aftertaste and no "ammonia" taste. Using a stabilised technology, we increased the concentration of dry substances due to the production of cheese grains, which allowed us to slow down the proteolytic activity of microorganisms. Thus, the fat content in the dry matter was 59%, which is more by 2% than with traditional moulding and by 3-1% relative to the starter Danisko MM101, depending on the processing of the clot and the moulding method. The stabilised technology will increase the nutritional value by increasing the protein content in cheese; in our study, the protein content increased by 0.4 – 0.9%. Thus, the research results substantiate the practicality of making adjustments to the production technology of camembert cheese.

1. Sorokoletov O.N., Gaptar S.L., Bgatov A.V., Innovacii i prodovol'stvennaya bezopasnost', 2022, No. 4, pp. 31–36. (In Russ.)

2. Borisova A.V., Polikarpova K.V., Hranenie i pererabotka sel'hozsyr'ya, 2020, No. 2, pp. 44–58, available at: https://e.lanbook.com/journal/issue/325811 (March 29, 2023). (In Russ.)

3. Ramanauskas I.I., Majorov A.A., Syrodelie: tekhnika i tekhnologiya (Cheese Making: Technique and Technology), 3-e izd., ster, Saint Petersburg: Lan', 2022, 508 p, available at: https://e.lanbook.com/book/201200 (March 29, 2023)

4. Zubkova A.A. Aktual'nye issledovaniya, 2022, No. 23 (102), pp. 24–27. (In Russ.)

5. MakSuini P.L., Foks P.F., Kotter P.P., Everett D.U., Syr. Nauchnye osnovy i tekhnologii (Cheese. Scientific Foundations and Technologies), Saint Petersburg: Professiya, 2019, 556 p.

6. Arhipova D.A. Fundamental'nye osnovy sovremennyh agrarnyh tekhnologij, Proceedings of the All-Russian Youth Scientific and Practical Conference, Tomsk, 2015, pp. 460–463. (In Russ.)

7. Sadovaya T.N. Pererabotka moloka, 2015, No. 8 (191), pp. 34–35. (In Russ.)

8. Getmanec V.N., Bondyreva L.A., Sovremennye aspekty proizvodstva i pererabotki sel'skohozyajstvennoj produkcii, Proceedings of the I International Scientific and Practical Conference Barnaul, 2023, pp. 41–47. (In Russ.)

9. Likarchuk Yu. Veterinariya i zhizn': federal'naya otraslevaya ezhemesyachnaya gazeta, 2022, No. 7-8, pp. 8–9. (In Russ.)

10. Kanina K.A., Zhizhin N.A., Semenova E.S. i dr., Izvestiya Timiryazevskoj sel'skohozyajstvennoj akademii, 2020, No. 3, pp. 121–133, available at: https://e.lanbook.com/journal/issue/314605 (March 29, 2023)

11. Belov A.N., Kriger A.V., Koval' A.D., Miklishanskij V.A., Syrodelie i maslodelie, 2018, No. 4, pp. 36–38. (In Russ.)

12. Belov A.N. i dr., Pererabotka moloka, 2018, No. 6, pp. 40–42. (In Russ.)

13. https://allgosts.ru/67/120/gost_34353-2017 (March 29, 2023)

14. https://docs.cntd.ru/document/902320560 (March 29, 2023)

15. https://docs.cntd.ru/document/499050562 (March 29, 2023)

16. https://www.internet-law.ru/gosts/gost/58470/ (March 29, 2023)

17. https://www.internet-law.ru/gosts/gost/62936/ (March 29, 2023)