Justification of design parameters of a two-stage cyclone vortex funnel using computer simulation

It has been established that in mini-feed mills with a productivity of up to 5 t/h, pneumatic transport systems with a cyclone unloader are more promising due to the lower emission of finely dispersed components. However, there are fewer such workshops on the market due to the smaller loading -volume of horizontal mixers on which cyclones are installed compared to vertical mixers that perform the function of cyclone-unloaders, in which emissions of fine dust into the work area are higher, which negatively affects working conditions, health of workers, as well as fire safety of premises. To reduce emissions of fine dust into the exhaust pipe of the cyclone, a technical solution in the form of a two-stage cyclone was proposed. A preliminary experimental test on a laboratory model showed an increase in particle collection by 32% about the serial cyclone-unloader CR under the same initial conditions and in the same standard size. As part of the design of a full-size version of the proposed two-stage cyclone, computer modeling of the separation process was carried out in the FlowSimulation software environment with dimensions close to the commercially produced cyclone BCR-450 to identify the influence of the geometric parameters of the -vortex funnel on the process of separation of fine particles from the transporting air flow with variable geometric dimensions diameter and height of the vortex funnel in the range from 100 to 270 and from 100 to 235 mm, respectively. Preliminary rational geometric parameters of the vortex funnel diameter equal to 180 mm and height equal to 150 mm of the proposed technical solution with a hydraulic resistance coefficient of8.4 are substantiated.

1. Sobranie aktov Prezidenta i Pravitel ’stva Rossijskoj Federacii, 2020, No. 20.

2. Kuznecov I.E., Zakurdaeva E.I., Brazhnikov K.A., Matuhnova K.V., Vestnik VGUIT, 2022, No. 2 (92), available at: https://cyberleninka.ru/article/n/otsenka-sovremennogo-sostoyaniya-otechestvennogo-rynka-kombikormov-v-usloviyah-novoy-ekonomicheskoy-realnosti (January 08, 2024) (In Russ.)

3. Konyaev N.V., Trubnikov V.N., Vestnik Kurskoj gosudarstvennoj sel’skohozyajstvennoj akademii, 2022, No. 9, pp. 140-146, EDN: QKXUXX. (In Russ.)

4. Bahchevnikov O.N., Benova E.V., Braginec S.V., Vestnik NGIEI, 2018, No. 8 (87), pp. 58-78, DOI: 10.24412/FeYLDNm5QaM; EDN: XYTGLR. (In Russ.)

5. Titov A.G. Intensifikaciya processa pyleulavlivaniya v elektrociklone putem snizheniya vtorichnogo unosa (Intensification of the dust collection process in an electric cyclone by reducing secondary entrainment), Abstract of the Dissertation of the Candidate of Chemical Sciences, Tomsk, 2014, 20 p. (In Russ.)

6. Misyulya D.I., Kuz’min V.V., Markov V.A., Trudy BGTU, 2011, No. 3, pp. 162-169. (In Russ.)

7. Misyulya D.I., Kuz’min V.V., Markov V.A., Teoreticheskie osnovy himicheskoj tekhnologii, 2013, No. 3, p. 331. (In Russ.)

8. Chekalov L.V., Guzaev V.A., Smirnov M.E., Alitinform: Cement. Beton. Suhie smesi, 2008, No. 3-4 (4-5), pp. 28-37. (In Russ.)

9. Pshenov E.A., Mezenov A.A., Vertej M.L. [i dr.], Patent na poleznuyu model’ № 208117 U1 Rossijskaya Federaciya, MPKB04C 9/00, BOID 45/12. Ciklon: № 2021106836 (Utility Model PatentNo. 208117 U1 Russian Federation, IPC B04C 9/00, BOID 45/12. Cyclone: No. 2021106836), Zayavl. 15.03.2021, Opubl. 03.12.2021, EDN: EZWRGT.

10. Pshenov E.A., Bleskin S.S., Sibirskij vestnik sel’skohozyajstvennoj nauki, 2023, Vol. 53, No. 2, pp. 101— 109, DOI: 10.26898/0370-8799-2023-2-13; EDN: DWNIBS. (In Russ.)

11. Chesnokov Yu.G., Lihachev I.G., Flisyuk O.M. [i dr.], Rossijskij himicheskij zhurnal, 2022, No. 3, available at: https://cyberleninka.ru/article/n/raschet-gidrodinamiki-potokov-v-vozvratno-potochnyh-tsiklonah-pri-pomoschi-paketa-prikladnyh-programm-flow-vision (February 06, 2024)

12. Alekseev K.A., Muhametzyanova A.G., Matematicheskie metody v tekhnike i tekhnologiyah - MMTT. 2020, Vol. 6, pp. 36-39, EDN: FBWISW. (In Russ.)

13. Chemezov I.I., Lechenko G.E., Volkov K.R., Masleev A.V. [i dr.], Vestnik evrazijskoj nauki, 2020, No. 4, available at: https://cyberleninka.ru/article/n/analiz-vliyaniya-geometricheskih-razmerov-vyhlopnoy-truby-tsiklona-na-stepen-ego-ochistki-s-pomoschyu-kompyuternogo-modelirovaniya (February 06, 2024)

14. Rudyka E.A., Baturina E.V., Semenihin O.A., Kalachev A.A., Vestnik VGTU, 2009, No. 3, available at: URL: https://cyberleninka.ru/article/n/issledovanie-protsessa-ulavlivaniya-pyli-na-zernopererabatyvayuschih-predpriyatiyah (January 28, 2023) (In Russ.)

15. GOST 12.3.018-79 Sistema standartov bezopasnosti truda (SSBT). Sistemy ventilyacionnye. Metody aero-dinamicheskih ispytanij (GOST 12.3.018-79 System of Occupational Safety Standards (SSBT). Ventilation systems. Aerodynamic Test Methods.), Moscow, 1979.